Nrgeo
Geothermal Exchangers for the exploitation of Subsoil Heat Energy
NRGeo is the system of geothermal probes and accessories for the exploitation of geothermal energy by NUPI Industrie Italiane S.p.A., specifically designed for geothermal heat pump systems that use the ground as a heat source.
The NRGeo system is composed of:
- Polyethylene probes DN 32 or 40 - PN 16, available in PE100 or PE100 RC, in rolls from 60 to 300 m, with single (simplex) or double (duplex) pipe
- Polyethylene pipes for the injection of bentonite mud
- Polyethylene pipes for horizontal connections
- Terminating fittings or probe feet (U-bend)
- Y-connectors and spacers
- Ballasts (throwaway weights to allow deep installations)
- Manholes and distribution manifolds thermoplastic material
- Equipment and accessories for mounting and installation
NRGeo probes are entirely produced, assembled and tested in NUPI Industrie Italiane S.p.A. production plants. The utmost care and attention is used during the delicate welding process for joining the probe and the foot, during testing and also during packaging, storage and shipping.
Moreover, the KIWA KQ certificate according to the technical specification KI 0418 (Geothermal Probe, pipes and fittings made of PE), attests to the quality of the system and the entire NRGeo production process by NUPI Industrie Italiane S.p.A.
The NRGeo system is well integrated within a project of high-tech energy management for a better exploitation of renewable energy sources. This project of larger scale called ELOSFERA consists in combining multiple product ranges by NUPI Industrie Italiane S.p.A.:
- ELOWEB for floor heating plant systems
- NRGeo for geothermal heat exchangers for the exploitation of heat from the ground
The integration of all these technologies allows the production of hot water for heating and sanitary use and cold water for air conditioning, thus making geothermal installations an ideal alternative to traditional systems.
The big advantage is that a geothermal system has alone the same functions normally entrusted to two different devices - boilers and air conditioners.
The ELOSFERA project is the only solution that is energetically possible and valid where the distribution of natural gas and/or electricity is not possible and where therefore boilers and/or air conditioners would not be of any use.
- POLYPROPYLENE SYSTEMS
- MULTILAYER SYSTEMS
- ENERGY SAVING SYSTEMS
- GAS & WATER DISTRIBUTION UNDER PRESSURE
- GAS & WATER DISTRIBUTION UNDER PRESSURE
- PLUMBING SYSTEMS
- WELDING UNITS
Niron Beta | β Grey PP-RCT Pipes and Fittings from DN20 mm to DN630 mm
Nero by Niron | PPR Pipes and Fittings with a duly UV stabilized POLYPROPYLENE outer layer
Polysystem | PP-R Pipes and Fittings for Plumbing and Heating Installations from DN16 mm to DN125 mm
Niron Preisolato | Innovative PRE-INSULATED Pipes and Fitting System suitable for applications where heat loss reduction is essential
Niron All Pro | Innovative PRE-INSULATED Pipes and Fitting System suitable for network for the distribution of hot fluids
Multinupi | Multilayer Pipes and Brass and PPSU Mechanical Pressure Fittings for the transport of Drinking Water
Multigeco | Multilayer Pipes and Total Flow Brass Fittings for the transport of Water & Gas
Nrgeo | Geothermal Exchangers for the exploitation of Subsoil Heat Energy
Polietilenetubi | Complete range of HDPE PE80 and PE100 Pipes from DN20 to DN1000 mm
Elopress | Complete range of Compression Fittings for the Distribution of Drinking Water and Fluids for Human Consumption
Elamid | PA12 Pipe and Fitting System for the transport of High Pressure Gas
Smartconduit | Non-hydroscopic composite Pipe and Fitting System designed to contain Electrical and Communication Cables in hazardous environments
Oiltech text= |
Smartlpg | Complete Pipe and Fitting System for the transport of LPG
Elosmart | Piping and Electrofusion Fitting System for Industrial Applications