GAS & WATER DISTRIBUTION UNDER PRESSURE
Elamid
PA12 Pipe and Fitting System for the transport of High Pressure Gas
ELAMID is a complete Polyamide 12 pipe and fitting system that satisfies high performance requirements in gas supply applications.
ELAMID is produced through the adoption of Polyamide 12 - PA12 - an advanced polymer material that is approved and standardized in compliance with ISO 16486 and ASTMF2785 Standards for the conveyance of natural GAS.The ELAMID thermoplastic piping system covers the MOP range up to 20 bar thanks to an MRS value of 18 MPa.
ELAMID is available from diameter 32mm to diameter 160 mm in coils and straight lengths (sticks).
BIM LIBRARY
Gallery
The ELAMID piping system offers the high reliable solution of the ELECTROFUSION connection method using the most advanced welding equipment and technologies.
Advantages
- MOP up to 20 bar for GAS supply
- Electrofusion connection method
- Chemical resistance
- Weathering resistance
- High slow crack growth resistance
- High point load resistance
- High Rapid Crack propagation resistance
- Flexibility
- Durability
- Low moisture absorption
- DATASHEET
- DOCUMENTS
- CASE HISTORY
- video
Fittings
Pipes
ACCESSORIES
Brochure
Brochure
INSTALLATION INSTRUCTIONS
APPROVALS
APPROVALS
Ispection certificates
NATURAL GAS PIPELINE FORTALEZA (BRAZIL)
NATURAL GAS PIPELINE MARIETTA (GEORGIA)
NATURAL GAS PIPELINE ULM (MONTANA)
- POLYPROPYLENE SYSTEMS
- MULTILAYER SYSTEMS
- ENERGY SAVING SYSTEMS
- GAS & WATER DISTRIBUTION UNDER PRESSURE
- GAS & WATER DISTRIBUTION UNDER PRESSURE
- PLUMBING SYSTEMS
- WELDING UNITS
Niron | PP-R Pipes and Fittings for Plumbing and Heating Installations from DN16 mm to DN355 mm
Niron Beta | β Grey PP-RCT Pipes and Fittings from DN20 mm to DN630 mm
Nero by Niron | PPR Pipes and Fittings with a duly UV stabilized POLYPROPYLENE outer layer
Polysystem | PP-R Pipes and Fittings for Plumbing and Heating Installations from DN16 mm to DN125 mm
Niron Preisolato | Innovative PRE-INSULATED Pipes and Fitting System suitable for applications where heat loss reduction is essential
Niron All Pro | Innovative PRE-INSULATED Pipes and Fitting System suitable for network for the distribution of hot fluids
Niron Beta | β Grey PP-RCT Pipes and Fittings from DN20 mm to DN630 mm
Nero by Niron | PPR Pipes and Fittings with a duly UV stabilized POLYPROPYLENE outer layer
Polysystem | PP-R Pipes and Fittings for Plumbing and Heating Installations from DN16 mm to DN125 mm
Niron Preisolato | Innovative PRE-INSULATED Pipes and Fitting System suitable for applications where heat loss reduction is essential
Niron All Pro | Innovative PRE-INSULATED Pipes and Fitting System suitable for network for the distribution of hot fluids
Multipinza | Multilayer Pipes and Multi-Pressed Mechanical Brass and PPSU Fittings for the transport of Drinking Water
Multinupi | Multilayer Pipes and Brass and PPSU Mechanical Pressure Fittings for the transport of Drinking Water
Multigeco | Multilayer Pipes and Total Flow Brass Fittings for the transport of Water & Gas
Multinupi | Multilayer Pipes and Brass and PPSU Mechanical Pressure Fittings for the transport of Drinking Water
Multigeco | Multilayer Pipes and Total Flow Brass Fittings for the transport of Water & Gas
Eloweb | Pipe and Fitting System for Radiant Floor Heating and Cooling
Nrgeo | Geothermal Exchangers for the exploitation of Subsoil Heat Energy
Nrgeo | Geothermal Exchangers for the exploitation of Subsoil Heat Energy
Elofit | HDPE Electrofusion Fittings and Special Parts for Water and Gas under Pressure
Polietilenetubi | Complete range of HDPE PE80 and PE100 Pipes from DN20 to DN1000 mm
Elopress | Complete range of Compression Fittings for the Distribution of Drinking Water and Fluids for Human Consumption
Elamid | PA12 Pipe and Fitting System for the transport of High Pressure Gas
Polietilenetubi | Complete range of HDPE PE80 and PE100 Pipes from DN20 to DN1000 mm
Elopress | Complete range of Compression Fittings for the Distribution of Drinking Water and Fluids for Human Consumption
Elamid | PA12 Pipe and Fitting System for the transport of High Pressure Gas
Smartflex | Complete HDPE Multilayer Pipes Electrofusion Fittings for the transport of Automotive and Aviation fuels, Biofuels and Hazardous Fluids
Smartconduit | Non-hydroscopic composite Pipe and Fitting System designed to contain Electrical and Communication Cables in hazardous environments
Oiltech text= |
Smartlpg | Complete Pipe and Fitting System for the transport of LPG
Elosmart | Piping and Electrofusion Fitting System for Industrial Applications
Smartconduit | Non-hydroscopic composite Pipe and Fitting System designed to contain Electrical and Communication Cables in hazardous environments
Oiltech text= |
Smartlpg | Complete Pipe and Fitting System for the transport of LPG
Elosmart | Piping and Electrofusion Fitting System for Industrial Applications